Installation manual
Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436
4
Version 2021
Safety
Intended use
These installation directions contain the instructions necessary to install the liftgate and adjust it
to those vehicles for which the liftgate was designed. To determine whether the device may be
installed on a certain vehicle, please contact us. We will provide the required information.
If the liftgate needs to be modified or if it is necessary to differ from these installation directions, a
written approval from Maxon Lift CORP. needs to be obtained first. Unapproved modifications
and amendments from these installation directions may lead to failure and to operating
interruptions as well as to hazards for the operator.
The warranty for the device will be voided by "unapproved modifications" and "deviations
from the installation directions."
The installations guidelines of the chassis manufacturer need to be complied with!
The liftgate is used for loading and unloading the vehicle and for transferring loads. Any other
use is prohibited.
Do not exceed the maximum load carrying capacity (see rating plate). Be sure to correctly
position the load on the platform.
Do not operate the liftgate with the vehicle in motion.
Do not use the liftgate to lift any person other than the operator.
This manual is intended for the manufacturer who installs the liftgate on the vehicle. It contains
information on transport, installation, and commissioning.
Read this manual before working on or operating the liftgate.
Do not deviate from the instructions contained in this manual. By doing so, you risk injury,
damage to property, and voiding of the warranty.
Make sure that this manual always remains with the liftgate or vehicle.
IMPORTANT
For information on operation, cleaning, maintenance, decommissioning, disassembly, and
disposal, refer to the accompanying user manual.
Requirements for personnel
The tasks described in this manual may be performed only by qualified and trained personnel.
Use personal safety gear when performing these tasks: protective goggles, work gloves, and
protective footwear.
Perform these tasks at an appropriate working height with the body in an appropriate position.
Avoid unusual positions.
Comply with valid legal and operational guidelines, such as occupational safety regulations and
environmental regulations.
Summary of Contents for GPC 22 X1
Page 2: ......
