11921 Sl
auson
A
ve
. Sa
nt
a Fe
Spri
ngs, C
A. 90670 (800) 22
7-41
16 F
AX
(88
8)
771-7713
21
2.
Bolt extension plate to vehicle as shown in
FIG. 21-1
. If necessary, reposition
extension plate so top surface is flush with top surface of sill. Then, torque bolts
and lock nuts to
105 lb.-ft
.
NOTE:
Do not tighten extension plate bolts and lock nuts until:
• All the bolts and lock nuts are in place.
• Top of extension plate is flush with top of rear sill.
STEP 1 - INSTALL EXTENSION PLATES - Continued
EXTENSION
PLATE
FRAME BOLT, HEX
1/2”-13 X 1 3/4” LG, GR8
(13 PLACES)
BOLTING EXTENSION PLATE (96” WIDE EXTENSION PLATE SHOWN)
FIG. 21-1
VEHICLE
BODY
IF NO CORNER POST ACCESS FOR
BOLT & NUT, WELD OUTSIDE EDGES
AS SHOWN.
3/16”
WELD VERT. EDGE
IF NOT BOLTING
3/16”
WELD VERT. EDGE
IF NOT BOLTING
TEAR DROP NUT 1/2”-13
(13 PLACES 96” EXTENSION PLATE,
15 PLACES 102” EXTENSION PLATE)
Summary of Contents for 72-150
Page 69: ......
