Maxon 72-150, Installation Manual

Page: 58 / 69

11921 Sl
auson
A
ve
. Sa
nt
a Fe
Spri
ngs, C
A. 90670 (800) 22
7-41
16 F
AX
(88
8)
771-7713
58
STEP 14 - ADJUST SAFETY HOOK (IF REQUIRED)
EXTENSION
PLATE
SAFETY
HOOK
PLATFORM
PLATFORM LOOP
(WRONG POSITION)
CHECK SAFETY HOOK FUNCTION
LOOP ADJUSTMENT
FIG. 58-1
FIG. 58-2
1. When raising platform to stowed position,
listen for sound of safety hook engaging
platform loop .
2. When the Liftgate is stowed, see if plat-
form loop is positioned above the safety
hook as shown in FIG. 58-1 .
1. If the safety hook is not positioned correctly
( FIG. 58-1) , Lower platform to ground level (see
Operation Manual) .
2. Adjust by bending the platform loop as shown
in FIG. 58-2 .
3. Stow the platform and check for correct
safety hook position. Repeat adjustment if
required.
CORRECT
POSITION
SAFETY HOOK
-FRONT SURFACE
FIG. 58-3
LUBRICATION (IF REQUIRED)
1. Make sure front surface of safety
hook (FIG. 58-3) is lubricated with
automotive grease. Apply grease
if required.
2. Make sure control handle rod
(FIG. 58-3) is lubricated where it
has contact with brackets. Apply
automotive grease if required.
BRACKETS
CONTROL HANDLE ROD
(TYPICAL LUBE POINT)
BEND IN
THIS
DIRECTION
EXTENSION
PLATE
SAFETY
HOOK
PLATFORM LOOP
(WRONG POSITION)
CORRECT
POSITION