manualshive.com logo in svg

Maximum Controls MAX MEGATRON 2500, Installation And Owner'S Manual

The Maximum Controls MAX MEGATRON 2500 Installation and Owner's Manual is the essential guide for installing and operating this powerful product. Easily download the comprehensive manual for free from our website, ensuring maximum control and convenience. Unlock the full potential of your MAX MEGATRON 2500 with our detailed and user-friendly manual.

Share
Download
background image

41

Maximum Controls LLC (“Manufacture”) warrants the original purchaser of this 
product, for the purpose to which this product is originally installed, that the product is 
free from defect in materials and/or workmanship for a period of 8 years for the 
Brushless DC Motor and cover, 5 years for everything else with the exception of the 
batteries which are limited to a 1 year warranty. The performance of this product is 
dependent on compliance to the instructions, maintenance, operation, and testing 
clearly outlined in the user manual. Failure to comply completely with those instructions 
will void this warranty in its entirety. This warranty does not cover damage to the 
product caused by vandalism, water damage, direct hit lightning strike, or installation 
errors.  This warranty does not include any labor charges that might be needed to 
troubleshoot, replace, or repair a problem.

If, during the limited warranty period, one of the components exhibits a defect in 
material and/or workmanship, please call 949-699-0220 before dismantling the product. 
Shipping instructions and an RMA (Return Material Authorization) Number will be 
issued by the factory service center when contacted. Do not send any product in for 
service without an RMA number. Shipping charges to and from the factory service 
center for warranty repairs are the responsibility of the customer. Repair or replacement 
of any warranty items is made at the sole discretion of the Manufacturer.

ALL IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO 
ANY WARRANTIES OF MERCHANTABILITY AND SUITABILITY FOR A PARTICULAR 
PURPOSE, ARE LIMITED TO 8 YEARS FOR THE BRUSHLESS MOTOR DC AND COVER, 
5 YEARS FOR EVERYTHING ELSE WITH THE EXCEPTION OF THE BATTERIES WHICH 
ARE 1 YEAR. NO IMPLIED WARRANTIES WILL EXTEND BEYOND THE WARRANTIES 
LISTED ABOVE. Some states do not allow limitations on how long an implied warranty 
last so this limitation might not apply to you.

This Limited warranty does not cover any problems with or relating to, the gate, the gate 
hardware, including but not limited to hinges, rollers, brackets, entry devices etc. Any 
service call that determines the cause of a problem to be external to the product could 
result in a fee. Under no circumstances shall the manufacture be liable for 
consequential, incidental or special damages arising in connection with the use, or 
inability to use, this product. Under no circumstances will the Manufacture’s liability for 
breach of warranty, breach of contract, negligence or strict liability exceed the cost of 
the product covered other liability in connection with the sale of this product.

megatron 2500 warranty

Summary of Contents for MAX MEGATRON 2500













































Reviews:

No comments

Related manuals for MAX MEGATRON 2500

FAAC 961 B-E Manual preview
961 B-E
Brand: FAAC Pages: 14
Honeywell L5100 Series Manual preview
L5100 Series
Brand: Honeywell Pages: 2
Honeywell 5877GDPK General Information preview
5877GDPK
Brand: Honeywell Pages: 4
Roger Technology RL651 Instructions preview
RL651
Brand: Roger Technology Pages: 2
Roger Technology SND/BA/68/DW Manual preview
SND/BA/68/DW
Brand: Roger Technology Pages: 16
Centurion XTrac Installation Manual preview
XTrac
Brand: Centurion Pages: 40
Centurion D2 Turbo Installation Manual preview
D2 Turbo
Brand: Centurion Pages: 96
BEA EAGLE 5 Manual preview
EAGLE 5
Brand: BEA Pages: 2
Parkside PSGTA60 Instructions Manual preview
PSGTA60
Brand: Parkside Pages: 16
CAME BXV Series Installation Manual preview
BXV Series
Brand: CAME Pages: 144
Wayne-Dalton 7400 Series Installation Instructions And Owner'S Manual preview
7400 Series
Brand: Wayne-Dalton Pages: 24
Wayne-Dalton 800 Installation Instructions Manual preview
800
Brand: Wayne-Dalton Pages: 59
Alutech IB/95-17 Operation Manual preview
IB/95-17
Brand: Alutech Pages: 3
Alutech FWO100/100-40 Built-In Mounting Instruction preview
FWO100/100-40
Brand: Alutech Pages: 12
vds AG-Future Technical Installation Manual preview
AG-Future
Brand: vds Pages: 50
V2 ELETTRONICA GOLD230V-DM Instructions Manual preview
GOLD230V-DM
Brand: V2 ELETTRONICA Pages: 92
USAut Ranger I Installation & Owner'S Manual preview
Ranger I
Brand: USAut Pages: 68
FAAC S700H SB User Manual preview
S700H SB
Brand: FAAC Pages: 10

Brands by name

Popular brands

Load more brands