1
5
Check with local building department prior to installing any permanent wiring on this gate operator. Make sure all wiring
complies with local code requirements.
MAX PS-24 Power Supply:
AC power management for the
AC input power to the gate operator. See pages 17, 18 & 21.
Release Handle Clamp:
Manually move the gate when
handle is raised. See page 34 & 38.
Audible Alarm:
Sounds when there is a problem with cycling
the gate. Push the alarm reset button on the control box to
shut off alarm (see below). Alarm can sound every time
operator is cycled using ONLY battery back-up power when
turned ON, See page 39.
24VDC Motor
MAX MC-100 Motor Controller:
Manages UL entrapment
protection devices and operator motor reversing ERD
sensitivity adjustment. See pages 16, 20, 21 & 32.
MAX BC-7 Battery Module:
Battery Back-Up and DC power
management for the gate operator. See page 16.
Limit Tabs:
Adjusts the OPEN and CLOSE gate positions.
See page 33.
Limit Switch Box:
Contains the limit switches. Gate operator
will
NOT
function when limit switch box is not connected.
See page 33.
Matrix 1:
Manages control panel operations. Manages
inputs/outputs, loops and reports problems with gate
operator. See Matrix 1 Section starting on page 22.
Alarm Reset Button:
Push to shut off alarm
and/or reset Matrix 1.
See pages 30, 35 & 39.
Wiring operator
Gate Operator System Overview
1
1
2
3
4
5
6
7
8
9
9
A
2
3
4
5
6
A
7
8
Gate Operator
Alarm Reset Button
