Maxi Comet Executive Exec-56-G, Instruction Manual

Page: 103 / 244

Comet Executive Gas Troubleshooting
6-11
WARNING
Only trained personnel with experience
in gas, electrical or mechanical repair
should troubleshoot and repair the unit.
Troubleshooting
WARNING
Read the REPAIR chapter and make
sure that the power is disconnected
before doing any repairs.
ISSUE POSSIBLE CAUSE SOLUTION
Poor Flatwork Finish
1. Feeding technique is im-
proper.
• Use correct feeding techniques. Refer to
Flatwork Handling on page 3-9 .
2. Ironing section controls are
incorrectly set for the linen
being processed.
• Check the TEMPERATURE Control and
the setting of SPEED knob. Refer to
Processing Standards on page 3-15
3. Ironing cylinder is not being
waxed at least once a day
(Does not apply to chrome
ironing cylinders).
• Refer to Waxing on page 3-7 .
4. Return ribbon drive roll
friction material is worn
smooth.
• Replace. Refer to
Return Ribbon Drive
Roll Friction Material Replacement on
page 7-40 .
5. Return ribbons are exces-
sively worn and are not
moving flatwork correctly.
• Replace. Refer to Return Ribbon Re-
placement on page 7-38
.
6. Compression roll pressure
is not even from side to
side.
• Adjust. Refer to Compression Roll
Pressure Check on page 7-17 and/or
Compression Roll Pressure Adjust-
ment on page 7-18 .
7. Compression roll padding
is worn.
• Replace. Refer to Compression Roll
Cover Replacement on page 7-19 .
Flatwork Sticks to Return Rib-
bons/Exits Ironer with Exces-
sive Static
1. Chrome ironing cylinder
needs waxing.
• Refer to Waxing on page 3-7 .
TOC INDEX