Maxi Comet Executive Exec-56-G, Instruction Manual, Page: 51 / 244

Comet Executive Gas Operating Guidelines
3-9
WARNING
The waxing cloth must
always be cool when it is
stored. A hot, folded waxing
cloth can catch fire by
spontaneous combustion.
7. When done with waxing, hang up the wax -
ing cloth to cool. Extend it completely; do
not fold it up.
8. After the waxing cloth is completely cool,
store it in an appropriate manner.
Flatwork Handling
It is very important how operators use the unit.
By following these guidelines, operators can
increase productivity, extend the life of the unit,
and most importantly-promote safety.
Safety
• Remove the flatwork only after it has
cleared the unit. Do not pull on the
finished flatwork while still in the unit.
• Parts of the unit can be hotter than
300° F (150° C). Severe burns can
result.
Maximum Efficiency
• Follow the posted standards for the type
of flatwork being processed.
• Place the flatwork straight and square on
the feed ribbons.
• Stretch the flatwork slightly to the sides
when feeding the flatwork into the unit.
• Do not process flatwork with frayed
edges or loose threads as these can cause
jams.
• Feed pillowcases lengthwise with the
closed end first.
• Leave a small gap between each item
being processed when feeding flatwork.
• Two operators should feed and receive
flatwork. While one operator is manually
folding flatwork, the other can prepare
the next piece of flatwork for processing.
TOC INDEX