MaxFlight FS-3000, Manual

Page: 21 / 131

21
2-10F Game Start
Game will only start when normally raised to the top after a game is selected. When the
platform reaches the upper limit switches the CPU will enable the program and full motion is
enabled. Click Start.
2-11 Game Over
When the time runs out, the game window timer will be zero. During this time the unit
will return to “ HOME POSITION”. After unit has stopped moving, the LOWER” icon comes
on, click on the “ LOWER” icon. This will lower the unit to the support. Once all movement has
stopped, open the cockpit and discharge the patrons.
2-12 System Shutdown
At the end of the operating day, follow these procedures to ensure that the simulator is
safely secured for the day.
2-12A TURNING KIOSK OFF AT END OF DAY . (Optional only for those that have
one)
1. If any program is running;
a. On operator desktop, r-click VNC icon,
b. Select the IP address for Kiosk, click OK
c. When kiosk window shows on monitor locate the SA12-XX-XXX bottom of
task bar
d. R-click on the SA12-XX-XXX and select SEND CONTROL,
ALT, DELETE
e. Click on Program running, select END, program shuts down
f. Click and hold click on side slide bar, drag down till you see the START on
task bar
g. Click START, then SHUTDOWN, then SHUTDOWN
h. Computer is shut down
2-12B SHUTTING DOWN THE MACHINE AT END OF DAY
1. Using the keyboard press ALT and ENTER at the same time, this shuts down the
coaster or flight sim program on the on-board computer.
2. Press IN the red E-Stop button below the monitor, this removes all power to the
motors.
3. Use projector remote, point to middle bottom of projector, double press the power
button, projector light turns OFF. Allow projector to cool down @3-5 minutes.
Continue on while projector is cooling.