MaxFlight FS-3000, Manual

Page: 71 / 131

MaxFlight Corporation
1 Executive Drive, Toms River, NJ 08755
Phone: (732) 281-2007 Fax: (732)281-2009
Electric Unit Daily Inspection Checklist (Hydraulic Lift)
Date of Inspection: AM Inspected By:
PM Inspected By:
* These sheets must be filled out completely and kept in your records.
AM Check PM Check
Inspect projector/TV for proper operation and cleanliness
Make sure that the ductwork is secure and functioning properly
Check to see canopy sensor works properly
Make sure the sound system and speakers are secure and operational
Make sure the cockpit Occupant Panic Switch is functioning properly
Inspect harnesses and harness switches for proper operation and condition
Inspect seat belts and crotch belts for proper operation and condition
Make sure gas spring safety clips are secured properly
Make sure the screen assembly is secure and in good condition
Make sure canopy alignment pins are tight
Inspect the cockpit latch and safety strap for proper operation and condition
Check stairway and front platform for any movement
_____ _____ Ensure the operator Emergency Stop Button is functioning properly
Make sure the tail boom stand is in good condition and its proper location
Ensure that the molding on the cockpit and tail boom cover is intact and secure
Make sure tail cover bolts are snug
Inspect all fiberglass for any visible damage
Make sure all pine tree fasteners are in place and panels are secure
Check for general ride cleanliness
Inspect any entrances, exits, stairways, ramps, fencing, guarding and barricades
Inspect the hydraulic lift system for leaks or wear on the hoses, fittings, valves
and pump
Ensure the Manual Brake Release Handles and Raise/Lower buttons are
functioning properly
NOTE: When inspection is completed, run one full ride cycle to ensure all system components function properly.