Maxcom MC6950, Quick Start Manual

Page: 27 / 53

Press on handset :
Enter the 4‐digit system PIN (default 0000).
Press MENU / OK to confirm, and the display will show SEARCH’G .
If the handset registration is successful, you will hear a confirmation tone and the < > will stop
flashing.
The handset will automatically be allocated the next available handset number. This
handset number is shown in the handset display in standby mode. If the handset
registration is unsuccessful, the < > will still flash.
Deregistering a handset to the base unit
This operation should only be necessary if one of your handsets becomes faulty
or lost and
needs to be replaced.
You will need to enter the 4‐digit System PIN (Default PIN is 0000) in order to de‐register a
handset from the base station. A de‐registered handset will have the < > flashing and
" ‐‐UNREG‐‐ " on the display.
Note: You cannot de‐register the handset that you are currently using.
x 2
Enter in the menu and Select BS SET
x 2
Select DEL HS
Press MENU / OK to display PIN?‐‐‐ .
Enter the 4‐digit system PIN (default 0000).
Press MENU / OK and the first handset number is displayed.
Press UP / DOWN to scroll through the list of registered handsets and select the number of the
or handset you want to de‐register.
Press MENU / OK to confirm, and the chosen handset will be de‐registered.
Set the base ringer melody
x 2
Enter in the menu and Select BS SET
Select RINGER
Press MENU / OK and UP / DOWN to select the desired ringer melody. (a total of 5 melodies for
or
your selection)
Note: The respective melody will be played while browsing the melody list.