Maxcom MC6950, Quick Start Manual

Page: 40 / 53

Call log
Press on handset :
Caller ID
This feature is available if you have subscribed to the Calling Line Identification service
with your network service provider. Your phone can store up to 10 received calls with
date/time information in the Call List. The number will be shown on the handset
display when the phone is ringing. If the number matches with one of the entries in
your Private Phonebook, the caller’s name stored in the private phonebook will be
displayed alternately with the number, and the handset will ring with the ring tone
associated with that phonebook entry.
If the call is from someone who withheld their number, e.g. by dialling 141,
WITHHELD will display.
If the call is from someone whose number is unavailable, e.g. an international call or
from a private exchange, OUT AREA will display.
If you've got new Caller Display records, the handset will display "X NEW CALLS" in standby mode.
The New Calls indication will remain until all the new call records have been viewed on that
handset.
Searching through the call log
All received calls are saved in the Call List with the latest call at the top of the list. When
the call list is full, the oldest call will be replaced by a new call. Any unanswered calls which
have not been viewed are marked with a <*> icon at the centre of the bottom line of the
display.
Press UP / CALLS to access the call list, or
x 1
Enter in the menu and Select CALL LOG
or
Press UP / DOWN to select the desired entry.
Press <#> to view the caller’s number if applicable.
or
Press MENU / OK and UP / DOWN to show DETAILS , and then MENU / OK to display the date of
the call.
Press <#> to see the time of the call, and press MENU / OK to return to the name or number.
Press MENU / OK to go back to the previous screen.