Maxcom MC6950, Quick Start Manual

Page: 46 / 53

Change the Care Voice PIN
When you access the Care Voice line remote mode, you will need to enter the
Care Voice PIN. You can change the PIN by menu.
x7
Enter MENU to select CARE VOICE.
or
Press MENU/OK and UP/DOWN to select CHG PIN.
Press MENU/OK and display will show "OLD PIN?".
Press MENU/OK to enter the old PIN (default is 0000).
Note: If the PIN entered is incorrect or invalid, display will return to the previous menu.
Press MENU/OK and display will show "NEW PIN?".
Press MENU/OK to enter the new PIN.
Press MENU/OK and display will show "CONFIRM?".
Press MENU/OK to repeat the new PIN.
Note: If the new PIN re-entered is not matched with the new PIN, display will
return to step 5.
Press MENU/OK to confirm.
Care Voice line remote
If you are away from your home, you can use another telephone to call and access the
Care Voice line remote mode, to set or listen to your messages remotely
Call the number and system will answer the call after 10 rings to allow user enter
Care Voice line remote mode.
Enter the Care Voice PIN code.
Press the voice message number (e.g.1) you would like to access.
Press the following keys to carry out your desired function.
Key Function
1 Play the selected Care Voice message.
2 Record a Care Voice message.
3 Activate the Care Voice message.
4 Deactivate the Care Voice message.
Note:
1). If you press <2>, start recording the message after a beep, and then press <2> to
save. If there is already a Care Voice message recorded before, it will be replaced.
2). If you press <3>, enter the time in 24 hour format (HH:MM), and then press <3> to
confirm. The time will be played, and then you can press <3> to reconfirm or
press <*> to cancel. If the Care Voice message is saved in this case, it will announce
once only at the set time.