manualshive.com logo in svg

Matrox Iris GTX Series, Installation And Technical Reference, Page: 5 / 100

Share
Download
Matrox Iris GTX Series Installation And Technical Reference Download Page 5

Matrox Iris GTX specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   58

Environmental specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60

Mechanical specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   60

LEDs on your Matrox Iris GTX   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Matrox Iris GTX connectors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Digital I/O and power connector  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   65

100/1000 BaseT Ethernet connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   67

VGA/USB connector  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   68

Liquid lens connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   70

Appendix C: Matrox Imaging operating system

 

utilities and recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   73

Matrox Imaging operating system utilities  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Upgrading the Matrox Imaging operating system   . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Restoring the Matrox Imaging operating system   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Restoring the MIOS to factory defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   76

Acquiring and restoring MIOS from a USB key . . . . . . . . . . . . . . . . . . . . . .   77

Burning an ISO to a USB key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   77

Updating the Matrox Iris GTX BIOS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Appendix D: Listing of Matrox Iris GTX smart cameras . . . . . . .   81

Key feature changes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Index

Regulatory Compliance

Limited Warranty

Summary of Contents for Iris GTX Series





































































































Reviews:

No comments