Matrox Iris GTX Series, Installation And Technical Reference, Page: 11 / 100

Inspecting your Matrox Iris GTX package 11
Matrox Iris GTX starter kit
There are two versions of the Matrox Iris GTX starter kit. The
GTX-STARTER-KIT is meant for use with all Matrox Iris GTX smart cameras
with sensors less than 5 Mpixels; these kits include a standard sized lens. The
GTX5000-STR-KIT is meant for use only with the Matrox Iris GTX 5000 series
of smart cameras (which have a 5 Mpixel sensor); this kit includes a slightly larger
lens. Both Matrox Iris GTX starter kits include the following:
• External power supply.
• M12-CBL-ETH/5, a 100/1000 BaseT Ethernet cable with an M12 8-pin (male)
X-coded connector on one end and an RJ-45 registered jack on the other. This
cable connects your Matrox Iris GTX to another computer or a network.
• M12-CBL-PWR/3, a Digital I/O and power cable with an M12 12-pin (male)
connector on one end and open ended wires on the other. This cable connects
your Matrox Iris GTX to power and third-party digital I/O devices.
• GTR-CBL-VGAUSB, a VGA/USB cable with an M12 12-pin (female) connector
on one end and a HD-15 (female) connector and a USB connector on the other
end. This cable connects your Matrox Iris GTX to a display device and a USB
device (such as, a keyboard or mouse).
• One C-mount lens.
• Matrox I/O Breakout Box. This device contains several wire terminal blocks,
switches, and push buttons. It is designed to provide a means to connect
third-party devices to your Matrox Iris GTX in a development environment or
on the production floor.
Handling
precautions
The lens of Matrox Iris GTX is a sensitive device. It should never be touched
directly. Always cover the lens if the smart camera is not in use to reduce dust
buildup. If dust accumulates on the lens, use either a can of compressed air or a
lens cloth to remove the dust.