Matrox Iris GTX Series Installation And Technical Reference Download Page 3

Page: 3 / 100

Chapter 1: Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Models available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Inspecting your Matrox Iris GTX package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Matrox Iris GTX with Design Assistant base package . . . . . . . . . . . . . . . . . . 10

Matrox Iris GTX starter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Available separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Third-party supported devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Software overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Documentation conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Matrox Iris GTX safety warnings and key to symbols . . . . . . . . . . . . . . . . . . . . . . . . 15

Manual overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 2: Powering and connecting to your

Matrox Iris GTX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Powering and connecting to your

Matrox Iris GTX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Optionally connecting a liquid lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Adding Matrox Iris GTX to your network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Device name (AUTO NETNAME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Using a static IP address with networks that do not use DHCP . . . . . . . 24

Connecting to your Matrox Iris GTX desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Accessing your Matrox Iris GTX desktop remotely . . . . . . . . . . . . . . . . . . . . 26

Accessing your Matrox Iris GTX from your PC . . . . . . . . . . . . . . . . . . . . . . 27

Summary of Contents for Iris GTX Series





































































































Search results

Summary of Contents for Iris GTX Series

Reviews:

Matrox Iris GTX Series, Installation And Technical Reference, Page: 3 / 100

Search results

Summary of Contents for Iris GTX Series

Reviews: