Matrox Iris GTX Series, Installation And Technical Reference, Page: 26 / 100

26
Chapter 2: Powering and connecting to your Matrox Iris GTX
Connecting to your Matrox Iris GTX desktop
From your smart camera‘s desktop, you can launch the MILConfig utility (to
configure updates, assist in troubleshooting your runtime application with Matrox
technical support, and set default values), as well as access files stored on your
smart camera.
Accessing your Matrox Iris GTX desktop remotely
If you do not want to keep a keyboard, mouse, and monitor connected to your
Matrox Iris GTX, once your smart camera is on your network, you can connect
to your Matrox Iris GTX remotely by using a virtual network computing (VNC)
program. Several VNC programs are available on the Internet. A few choice
examples are available to download directly from your smart camera. To download
and install one of these programs, perform the following:
1. For Matrox Iris GTX with Design Assistant users, go to the following web address:
Replace xxxxxx with the six digits of your smart camera’s MAC address, or if you
have changed the camera’s device name, replace GTXxxxxxx with its new name.
You can also replace GTXxxxxxx with the smart camera’s IP address.
2. Select the installer that best matches your needs.
Follow all on-screen instructions. Refer to the provided documentation for
assistance.
3. Before using the installed VPN, you must first enable Auto logon in the Matrox
Design Assistant portal.
Logging in
When using VNC for the first time, you must log into your Matrox Iris GTX
using the default user account:
Warning

Do not delete or rename the mtxuser account. You can however change the
password.
http:\\GTXxxxxxx:8080
User name: mtxuser
Password: Matrox