Matrix T5X-02, Service Manual

Page: 50 / 69

46
9.12 eleVaTioN moTor remoVal
CHaPTer 9: ParT rePlaCemeNT GUide
1) Unplug treadmill.
2) lift the treadmill and support it so that the front wheels are off the floor, or the unit may be tipped on it's side (figure a).
3) remove the clip from the pin attaching the motor to the rack (figure b & C).
3) disconnect the elevation motor power cable from the mCb (figure d).
4) disconnect the pin from the elevation motor (figure e).
5) lift the elevation motor away from the treadmill (figure f).
6) When installing the elevation motor, make sure to replace the white washers at the top and bottom (figure G).
7) auto Calibration must alWayS be run after replacing the elevation motor.
fiGUre a
fiGUre b
fiGUre C