Matrix T5X-02, Service Manual

Page: 39 / 69

CHaPTer 9: TroUbleSHooTiNG
9.1 PlaSTiC SHroUd remoVal
1) remove the front shroud using a 6mm allen wrench (figures a & b).
2) The shroud is split into two pieces. The upper shroud is held with two screws, the lower shroud is held with four screws.
3) both covers are removed (figure C).
fiGUre a
fiGUre b
fiGUre C
CHaPTer 9: ParT rePlaCemeNT GUide