Matrix Retail E50, Troubleshooting Manual

Page: 13 / 24

13/24 | Version 18 | Revision Date: 12/28/2021 | Revised by: EM Matrix Xer & Xir Console
ClimbMill Only
RED
SA
FET
Y
BU
TTO
N
The console shows a red safety
button is pressed
Check, and if necessary,
depress the safety
buttons. (One button is
located at the top of the
handlebars and the
second is on the lower
right side handlebar.)
Check the assembly steps
to ensure the wires are
connected and not
pinched.
FO
OT
ON
CO
NT
RO
L Z
ONE
The console shows an image of a
foot on the control zone
Check for and remove any
items pressing on the
control zone.
Check the wire
connection and ensure
the wires are not pinched.
FO
OT
B
LO
CK
IN
G
IR
S
IG
NA
L
The console shows an image of a
foot blocking the IR sensor
Check for and remove any
objects blocking the IR
transmitter signal.
Clean the IR transmitter
per the maintenance
section in the C50 Frame
Owner’s Manual.
If your issue persists, Click here .
Additional Information
•
Error Codes with a standardized 4-character alphanumeric ID are described in the Master Error
Code List and typically relate to hardware failures. This page relates to software error codes.
• Reference for valid LCB/MCB type code as displayed by the console:
Model Type Code Model Type Code Model Type Code
T30 0x04 T30 0x0E T70 0xC1
T30 0x06 T50 0x0E T75 0xC1
A30 0x0B TF30 0x0E T70 0xC2
E50 0x0C TF50 0x0E T70 0xC3
R50 0x0C E30 0x12 T75 0xC3
U50 0x0C R30 0x12 T75-02 0xC3
C50 ? U30 0x12 A50 0x15