14/24 | Version 18 | Revision Date: 12/28/2021 | Revised by: EM
Matrix Xer & Xir Console
S
AFETY
K
EY
Emergency, Stop, E-Stop, Estop, All Stop, Button
Safety Key not
functioning properly
(TM)
Short all three pins
of
GREEN
socket on
UCB with large flat-
blade screwdriver.
Did this clear the
E-Stop error?
No
Replace Console
TSG-DB12
Yes
Replace switch &
wires
Did not fix?
Replace Console
TSG-DB13
SA
FE
TY
KE
Y
Safety Key screen on
non-treadmill
NO
N-
TR
EA
DMI
LL
Update software to
latest version. Restore
Factory Defaults and
ensure the correct
Machine Type is
chosen.
Didn’t fix?
Replace Console
TSG-DB14
Treadmill:
Safety Key message
appears; key not
removed
Ensure Safety Key is
properly insterted/
attached.
TR
EA
DMI
LL
Update to latest
software version.
Short all three pins
of
GREEN
socket on
UCB. Replace switch
& wires if shorting
pins clears the error.
Replace Safety Key
Assembly
ClimbMill: Check, and if
necessary, depress the
safety buttons. (One
button is located at the
top of the handlebars and
the second is on the lower
right-side handlebar.)
Additional Information
•
Safety Key switch should measure Open when triggered/engaged and Short when in operating
position.
•
DO NOT bypass the Safety Key (other than for testing function). This is an essential safety device
and must operate properly.
•
The ClimbMill has two safety buttons: One button is located at the top of the handlebars and the
second is on the lower right-side handlebar.
