Programming SIMADO GFX44
Programming of SIMADO GFX44 can be done in the following ways:
•
Using Serial Jeeves
•
By issuing commands from FXS Port
•
By issuing commands through Mobile Port
Programming SIMADO GFX44 using Serial Jeeves:
SIMADO GFX44 enables you to program the system through windows based
software, known as Jeeves. Jeeves is a flexible and friendly tool with mouse
operated GUI. To program the system using Jeeves, follow the steps given
below:
•
Insert 'Matrix SIMADO GFX44' CD provided to you along with the product
in the CD Drive of your computer. It is an auto-run CD.
•
CD drive window will open. It contains two folders viz. 'Documents' and
'SIMADO GFX44 Jeeves VxRy'. (If CD does not open by itself, click on 'My
Computer'
‘CD Drive’ to exaplore the CD.
•
Open 'SIMADO GFX44 Jeeves VxRy' folder. Run set-up to install the Jeeves
into your computer.
•
Connect your computer with the system using COM Port.
•
Click on Start
Programs
Matrix
SIMADO GFX44 Jeeves VxRy.
SIMADO GFX44 Serial Jeeves Home page will open .
Summary of Contents for SIMADO GFX44
Page 1: ...SIMADO GFX44 Quick Start ...
Page 2: ......
