23
CHAPTER 6: PART REPlACEMENT gUIDE
6.5 RIgHT SIDE CHAIN / PUllEy REPlACEMENT
1) Remove the right side crank as outlined in Section 6.1.
2) Remove the upper plastic shroud as outlined in Section 6.2.
3) Remove the lower plastic shrouds as outlined in Section 6.3.
4) Locate the hole in the frame around the small drive pulley on the right side of the KRANKcycle™ (Figure A).
5) Install a long M8 screw into the hole to prevent the pulley from turning (Figure B).
6) Turn the fly wheel forward to turn off the pulley (Figure C).
7) Remove the chain and pulley (Figure D).
8) Reverse Steps 1-7 to install a new right side chain / pulley.
fIgURE A
fIgURE b
fIgURE C
fIgURE D
