21
6.3 loWER PlASTIC SHRoUDS REPlACEMENT
1) Remove the right side crank as outlined in Section 6.1.
2) Remove the upper plastic shroud as outlined in Section 6.2.
3) Use a 3mm Allen wrench to remove the 6 screws holding the shrouds together (Figure A).
4) Use a 5 mm Allen wrench to remove the 3 screws holding the shrouds to the frame (Figure B).
5) Remove both lower plastic shrouds (Figure C).
6) Reverse Steps 1-5 to install new lower plastic shrouds.
fIgURE A
fIgURE b
fIgURE C
CHAPTER 6: PART REPlACEMENT gUIDE
