12
5) If the cable / sheath do not have excessive wear, and tightening the adjustment screw does not resolve the problems, the issue may be with
the connection of the cable to the pivot handle.
6) To access the pivot handle:
a. Remove both the upper and lower shrouds as outlined in Sections 6.2 and 6.3.
b. Remove the pivot handle and resistance knob as outlined in Sections 6.7 and 6.8.
c. Remove the 4 screws holding the pivot handle shroud in place (Figures A & B).
d. Remove the pivot handle shroud (Figure C).
e. Re-install the upper shroud screw so that the pivot handle cable is stationary against the frame (Figure D).
5.3 TRoUblESHooTINg - EXCESSIVE PlAy IN HEIgHT ADJUSTMENT lEVER - CoNTINUED
CHAPTER 5: TRoUblESHooTINg
fIgURE A
fIgURE b
fIgURE C
fIgURE D
