26
– balanSys REV – Extension Gap First: 3in1
Fig. 43
Fig. 44
Fig. 45
Use the Memory Board (79.02.0637) to record the
diameter of the last reamer (in this example: diameter
18 mm and length 140 mm).
Secure the distal cutting block of the 3in1 system
(71.34.0682) onto the reamer using the distal cutting
block guide of the 3in1 system (71.34.0683) and the
clamp lever (71.34.0684V) of the 3in1 system and the
screw of the distal cutting block (79.02.0609).
Remark
The anterior «left» or «right» marking must corre-
spond to the side of the knee involved (if this is not so,
the clamp lever of the 3in1 system can be turned
round).
