22
– balanSys REV – Extension Gap First: 3in1
Fig. 33
Fig. 34
Fig. 35
Put the appropriate Trial Stem Sleeve (predetermined
diameter and length, view Memory Board) onto the
Trial Stem Core and tighten the sleeve by hand in a
clockwise direction.
Remark
To release the Trial Stem Sleeve, insert a Pin through
the hole at the distal end and turn in the appropriate
direction.
Click the Test Augmentations onto the lower surface
of the Trial Tibial Plateau.
Remark
The Reference Plate can be used to remove the Trial
Tibia Augmentation. Insert the tip into the gap be-
tween Trial Tibial Plateau and Augmentation and
push.
Connect the Positioner (79.02.0272) to the test as-
sembly. Tighten the screw to secure the assembly.
