8
Page 43
Weekly maintenance tasks or after 25 operating hours.
•
• Check all screw connections and bolt connections. Tighten any loose screws, and secure
any loose bolt connections with spring cotter pins. Visually inspect the belt; worn or dam-
aged belts must be
replaced.
Mower blades
The blades are wear parts and must be sharpened and balanced regularly.
Wear suitable protective equipment for installation and removal
of the mower blades.
If the blade is deformed by an object, a rock for example, the blade must be
replaced without delay. Do not continue to operate the mower with the dam-
aged blade.
Mounting the V-belt
If you must replace the V-belt, when mounting, ensure that the belt runs correctly in its course.
Fig. 42: V-belt run for the MOW 140
MOW-140
