4
Page 11
Implement is only suitable for a PTO shaft speed of 2000 rpm!
Predominantly mid-mount, front, or independent engine PTO shafts.
Implement is only suitable for a PTO shaft speed of 1000 rpm!
Usually an independent engine PTO shaft.
Implement is only suitable for clockwise PTO shaft rotation! (CW)
Implement is only suitable for counterclockwise PTO shaft rotation! (CCW)
The direction of rotation is always specified when viewing the end of the PTO shaft from the front
(see Fig. 1 page 5).
Do not operate the mower without discharge guard or suction port!
After each use re-tighten all screws
Lubricating point
Safety devices
There are various safety devices on machines to protect people when working with a machine, or
who are in the direct vicinity of the machine, to prevent premature wear, and also to prevent envi-
ronmental damage. These safety devices are a fixed component of the machine and must not be
manipulated or removed. Missing or damaged safety devices must be replaced without delay.
Concerning the safety devices, a distinction is made between protective devices that prevent con-
tact with a danger point, and safety notices that alert to a hazard on the machine.
Likewise, hazards can occur through insufficient maintenance; consequently the maintenance in-
structions must also be classified as safety notices
