Matermacc IRRIGAMATIC PRO35, Manual

Page: 23 / 30

IRRIGAMATIC PRO 35
Page 15
6.2.7 CHANGING THE CURRENT RETURN
SPEED
!! ATTENTION !!
!! ATTENTION !!
The machine regulation
MUST NOT be changed if
the machine is not in view.
Compose the message WSC on a mobile phone.
Send the SMS to the console, which replies with a
corresponding SMS
Example of a WSC message.
1
Compose the message WSC35.
2
Send the SMS to the console.
6.2.8 STARTING AND STOPPING THE
MACHINE REMOTELY
An operation cycle may be started by sending an
SMS to the console.
To start an irrigation cycle
1
Compose the SMS
START
.
2
Send the SMS to the console.
3
The console replies with an SMS indicating
successful receipt of the command and time at
which the SMS was sent:
START_OK_23-03-08_08:50:20
1
Compose the SMS STOP .
2
Send the SMS to the console.
3
The console replies with an SMS indicating
successful receipt of the command and time at
which the SMS was sent
STOP_OK_23-03-08_08:55:10
1
Compose the SMS
ALT
.
2
Send the SMS to the console.
3
The console replies with an SMS indicating
successful receipt of the command and time at
which the SMS was sent
ALT_OK_23-03-08_08:55:10
TO STOP IRRIGATION TEMPORARILY
TO RESTART THE SUSPENDED CYCLE,
USE THE START CONTROL
TO STOP IRRIGATION PERMANENTLY
!! ATTENTION !!
!! ATTENTION !!
C o m m a n d s a f f e c t i n g t h e
regulation parameters of the
m a c h i n e a r e t o b e u s e d
exclusively when in view of the
machine (10...15m).
The commands to start and stop
the machine are to be used
exclusively when in view of the
machine (10...15m).
THE MACHINE MUST
NOT BE STARTED WHEN
NOT IN VIEW!