Matermacc IRRIGAMATIC PRO35, Manual

Page: 9 / 30

IRRIGAMATIC PRO 35
Page 01
1 GENERAL FEATURES
FUNCTIONS:
•
Current date and time.
•
Measurement of wound and unwound
tube.
•
Setup of work start time at a given time
• Start delay 0...120 min.
•
Work speed adjustment (5 to 850 m/h).
•
Display of the irrigation time and work end
time.
• Setup of work end time and new
calculation of the adjusting parameters.
• Final pause 0...120 min.
•
Operations once the irrigation is over.
• Automatic stop for energy saving.
•
Auxiliary irrigator control
•
Programmed start-up of rewind end
signaller.
• 4 available irrigation criteria: 1) m/h, 2) rain
measurement: a) with flowmeter, b) by set
flow rate, c) by flow rate estimated setting
pressure on the nozzle, diameter of the
nozzle, width of the irrigated area and mm
of water.
OPTIONS:
Connection with a pressure switch
Speed measurement with feeling roller
Management of a timed auxiliary irrigator
Connection with wind - rain feelers
Connection with a flow meter.
Connection with an integrated GSM card
for data transmission and receipt.Through
a cellular phone it permits to:
Send a SMS when a programmed event takes
place (end of work, wind, rain, ...).
Check a few parameters of the installation
·
carries out some speed start - stop - change
for the current sector.