IRRIGAMATIC PRO 35
Page 04
3.3 PERFORMING AN IRRIGATION
CYCLE
3
.3.1
PREPARING
1
BEFORE STARTING TO LAY THE TUBE
position the focus on “OPERATION” and press the
knob. The display will indicate whether the
previous cycle completed correctly:
ROLL TUBE
0 m
2. If the value is not zero, set it to zero as follows:
A) Position the focus on the value, pressing the
knob. The display will show, for example:
ROLL TUBE
m
B)
Turn the knob to the left to set the value to
zero and confirm by pressing the knob.
The display will show:
ROLL TUBE
m
3. Perform the tube unrolling operations as normal;
after completion, the display will show for
example:
ROLL TUBE
100 m
4. To change the value position the focus on the
value, press the knob and then turn it to the left or
right:
ROLL TUBE
m
5. Confirm by pressing the knob. The display
Will show the selected value, for example:
ROLL TUBE
m
6. To continue, position the focus on and
press the knob. The display will show, for
example:
START TIME
11:25
25/03/2008
07*
00*
100*
102
NEXT
A
To change the start time, position the focus on
the minute and/or hour value and press the
knob. The display will show, for example:
START TIME
:25
25/03/2008
B
To change the start time, turn the knob and
confirm by pressing it. The display will show,
for example:
START TIME
14:25
25/03/2008
7
To continue, position the focus on and
press the knob. The display will show, for
example:
START PAUSE
0 min.
A
To change the duration of the start delay,
position the focus on the minute and/or hour
value and press the knob. The display will
show, for example:
START PAUSE
min.
B
To change the duration of the start delay, turn
the knob and confirm by pressing it. The
display will show, for example:
START PAUSE
min.
8
To continue, position the focus on and
press the knob. The display will show, for
example
SECTOR 1
260 m
30 m/h
A
To change the value of the sector length
and/or speed, position the focus on the
parameter and press the knob. The display
will show, for example:
14*
0*
3
NEXT
NEXT
Summary of Contents for IRRIGAMATIC PRO35
Page 2: ...IRRIGAMATIC PRO 35 ...
Page 6: ...IRRIGAMATIC PRO 35 ...
Page 28: ...IRRIGAMATIC PRO 35 Page 20 IRRIGAMATIC PRO 35 ...
Page 29: ...Note ...