background image

MWLSFDC 400LM Cordless Work Light

MWLSFDC 3 07/12/17

FEATURES 

•  COB LED provide similar lighting as a fluorescent bulb (75-155 lux and 400 lumen)
•  3.7V 4400mAh Li-ion rechargeable battery for continuous use up to 3 hours on high or 6 hours on low
•  Automatic shut off and over charge protection prolongs battery life
•  Rubber grip design provides non-slip grip
•  2 Pc. 360° rotating hook for easy use
•  2 magnets on back of light secures to any metal surface
•  IP54 (water and dust resistent)
•  Includes a cULus listed micro USB adapter

OPERATING INSTRUCTIONS 

•  To use, plug the unit into any 100-240V AC power source, such as a wall receptable. Let the unit fully charge  

  until the green indicator on the adapter turns on before use.
•  Charge the light every month if not in constant use, and after each use, it is used often to insure longevity.
•  Press the on/off switch once to turn on high light. 
•  Press the on/off switch again to turn on low light. 
•  Press the on/off switch a third time to turn off.

cordless product safety rules. If you use 

this tool unsafely or incorrectly, you can 

suffer serious personal injury.

1.   Hold light by insulated gripping  

 

surfaces when performing an  

 

operation avoiding contact with  

 

hidden wiring. Contact with a “live”  

 

wire will also make exposed metal  

 

parts of the light “live” and shock  

 

the operator.

2.   Be aware that this light is always in  

 

operating condition, because it does  

 

not have to be plugged into an  

 

electrical outlet.

3.   Always be sure you have firm footing.
4.   Be sure no one is below when using  

 

the light in high locations.

5.   Some material contains chemicals  

 

which may be toxic. Take caution to  

 

prevent working dust inhalation and  

 

skin contact. Follow material supplier  

 

safety data.

WARNING: MISUSE or failure to follow 

the safety rules stated in this instruction 

manual may cause serious personal 

injury.

 

risk of injury when used on another  

 light.
15. 

CAUTION:

 Magnetic forces can  

 

be harmful to personal property    

 

and equipment including cell phones,  

 

computers, diagnostic equipment and  

 

credit cards.

16.  Do not store light at temperature  

 

above 120°F (49°C).

17.  This product may contain one or more  

 

chemicals known to the State of   

 

California to cause cancer and birth   

 

defects or other reproductive harm.

  

 

Wash hands thoroughly after handling.

Service:

18.  Light service must be performed only  

 

by the MATCO authorized service  

 

centers listed. Service or maintenance  

 

performed by unqualified personnel  

 

may result in a risk of injury. Repair  

 

by unqualified personnel, use of  

 

unauthorized parts, and failure to  

 

follow maintenance instructions may  

 

create a risk of shock or injury.

Specific Safety Rules:

DO NOT let comfort or familiarity with 

product replace strict adherence to 

WARNING

Summary of Contents for MWLSFDC
























Reviews: