MWLSFDC 400LM Cordless Work Light
MWLSFDC 2 07/12/17
6. Dress properly. Do not wear loose
clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves
away from moving parts. Loose
clothes, jewelry, or long hair can be
caught in moving parts.
7. Avoid accidental starting. Be sure
switch is in the locked or "off" position
before inserting battery charger.
Carrying lights with your finger on
the switch or inserting the battery
charger into a light with the switch
"on" invites accidents.
8. Do not overreach. Keep proper footing
and balance at all times. Proper
footing and balance enable better
control of the light in unexpected
situations.
9. Use safety equipment. Always
wear eye protection. Dust mask,
non-skid safety shoes, hard hat, or
hearing protection must be used for
appropriate conditions.
Light Use and Care:
10. Disconnect battery charger from light
or place the switch in the locked
or "off" position before making any
adjustments, changing accessories,
or storing the light. Such preventive
safety measures reduce the risk of
starting the light accidentally.
11. Store idle lights out of reach of
children and other untrained persons.
Lights are dangerous in the hands of
untrained users.
12. When light is not in use, keep it away
from other metal objects like: paper
clips, coins, keys, nails, screws, or
other small metal objects that can
make a connection from one terminal
to another. Shorting the battery
terminals together may cause sparks,
burns, or a fire.
13. If damaged, have the light serviced
before using. Many accidents are
caused by poorly maintained lights.
14. Use only accessories that are
recommended by the manufacturer
for your model. Accessories that may
be suitable for one light may create a
SAVE THESE INSTRUCTIONS!
General Safety:
It is the responsibility of the owner to make
sure all personnel read this manual prior to
using the device. It is also the responsibility
of the device owner to keep this manual
intact and in a convenient location for all
to see and read. If the manual or product
labels are lost or not legible, contact Matco
Tools for replacements. If the operator is
not fluent in English, the product and safety
instructions shall be read and discussed
with the operator in the operator's native
language by the purchaser/owner or his
designee, making sure that the operator
comprehends its contents.
Read and understand all instructions.
Failure to follow all instructions listed
below, may result in electric shock, fire,
explosion and/or serious personal injury.
Work Area Safety:
1. Keep your work area clean and well lit.
Cluttered benches and dark areas
invite accidents.
2. Do not operate lights in explosive
atmospheres, such as in the presence
of flammable liquids, gases, or dust.
Lights create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors
away while operating a light.
Distractions can cause you to lose
control and endanger others.
Electrical Safety:
4. A battery operated light with integral
batteries or a separate battery pack
must be recharged only with the
specified charger for the battery. A
charger that may be suitable for one
type of battery may create a risk of
fire when used with another battery.
Personal Safety:
5. Stay alert, watch what you are doing,
and use common sense when
operating a light. Do not use light
while tired or under the influence of
drugs, alcohol, or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
WARNING
