Portable Sampling Drive Operating Manual
Masterflex
Section 2
Setup
1.
Care has been taken in the packaging of the drive to protect it in transit from
the factory to its fi nal destination. After opening the carton, save the packing
material until proper product operation has been verifi ed.
Th
e drive consists of the following items:
(1) Drive Unit
(1) AC/DC Power Supply/Converter
(1) Operating Manual
(1) Warranty Card
(1) Pouch for Accessories
2-1
CAUTION:
Use of pump heads, tubing sizes and formulations other
than those specified in this manual, or the mounting and use of two or
more pump heads concurrently will result in improper operation and
possible damage to the unit.
!
WARNING:
Turn drive off, remove all the power to the unit, including
the AC/DC Power Supply/Converter, Automotive Power Adapter or
other external power source if present before removing or installing
pump head or tubing. Place the Mode of Operation Switch (RUN/
CHARGE) in the “CHARGE” position and all other switches in the off
position. This will help prevent accidental activation of the drive
mechanism so fingers or loose clothing will not get caught in the
pump drive mechanism.
!
2.
Th
e drive does not include a Pump Head or tubing. Th
e drive is capable of
running one (1) of the following Pump Heads: MASTERFLEX® L/S® Standard,
L/S QUICK LOAD, L/S EASY-LOAD or L/S PTFE Tubing Pump Head.
See Appendix A for Pump Head and tubing catalog numbers recommended.
See Appendix B for flow rates and lift.
Select one of the recommended Pump Heads and MASTERFLEX tubing
formulations and mount it to the drive per the instructions in the Pump Head
manual.
