headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
9
WARNING!
Ensure that the power supply outlet in question is properly grounded. If not sure, have a
licensed electrician check the outlet.
WARNING!
To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection.
SPECIFIC SAFETY RULES FOR THE ROUTER TABLE
WARNING!
Read all instructions. Failure to comply with all of the following instructions may result in
electric shock, fire and/or serious injury.
•
Read and understand all instructions and warnings in the Instruction Manual for
the router table and the router used with this table.
Failure to follow all instructions and
warnings may result in serious personal injury.
•
Fully assemble and tighten all fasteners required for this table and for mounting the
router to the table.
Do not use the router table until all assembly and installation steps have
been completed.
•
Before each use, check the router and the table to ensure that all fasteners are still
tight.
A loose table is unstable, and may shift during use.
•
Unplug the router before installing it into the table.
•
Turn off the router-table safety switch that controls power to the router or unplug the
router before making adjustments or changing accessories, such as bits or cutters
.
•
Always wear a dust mask and ear protection when using this power tool.
•
Only use cutters that are designed for the particular router in use.
•
Only use sharp cutters that are not chipped or cracked.
Blunt cutters will cause stalling.
•
Secure small pieces of wood firmly before working.
Never hold a workpiece by hand.
•
Secure the workpiece using clamping equipment.
•
Before starting the router,
check that the cutter bit is firmly positioned and secured in the
collet.
•
Do not exceed the maximum indicated rotation speed of the cutter bit.
•
Routing operations must always be performed against the direction of rotation of the
cutter bit (cutter rotation).
•
Note that the direction of rotation is reversed when the router is installed in the router
table: when installed in the router table, the cutter rotates counter-clockwise.
•
The cutter bit must be running at full speed before it is lowered to the workpiece.
•
When operating the router, always hold the handles firmly with both hands.
Always
ensure that footing is secure when working.
SAFETY GUIDELINES
Summary of Contents for 054-6841-4
Page 32: ......