MasterCraft 054-6841-4 Instruction Manual Download Page 5 | Manualshive

Page: 5 / 32

background image

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

5

SAFETY GUIDELINES

WARNING!

Safety symbols in this Instruction Manual are used to flag possible dangers. The safety symbols
and their explanations require your full understanding. The safety warnings do not, by themselves,
eliminate any danger, nor are they substitutes for proper accident prevention measures.

WARNING!

This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.

KNOW YOUR TOOL

Read this Instruction Manual and all of the labels affixed to the router table carefully before operating
this tool. Keep this Manual available for future reference.

IMPORTANT

This tool should only be serviced by a qualified service technician. For more information, call the toll-
free helpline at 1-800-689-9928.

READ ALL INSTRUCTIONS THOROUGHLY

SAVE THESE INSTRUCTIONS

GENERAL POWER TOOL SAFETY WARNINGS

WARNING!

Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

GENERAL SAFETY RULES FOR BENCH TOOLS

WARNING!

Read and understand all instructions. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.

•

Keep guards in place and in working order.

•

Remove adjusting keys and wrenches.

Form a habit of checking to see that keys and

adjusting wrenches are removed from the tool before turning it on.

SAFETY GUIDELINES

«
...
3
4
5
6
7
...
»

Summary of Contents for 054-6841-4

































Reviews:

No comments

Related manuals for 054-6841-4

Brand: Omlet Pages: 4

Brand: Quantum Pages: 384

Brand: Tandberg Data Pages: 60

SOHORAID ST4-TB3

Brand: Stardom Pages: 25

Brand: U-Line Pages: 6

Brand: Hanover Pages: 27

Brand: BOH Enviromental Pages: 20

Brand: NEC Pages: 254

Brand: IBM Pages: 60

Brand: Hoshizaki Pages: 8

Brand: Hoshizaki Pages: 15

Brand: Alpha ESS Pages: 76

Brand: Clarke Pages: 12

Brand: GARDEN MASTER Pages: 2

Brand: Teac Pages: 4

Porsche Design P'9220

Brand: LaCie Pages: 39

KOL-RAID3 Series

Brand: Kollector Pages: 64

Brand: Texas Memory Systems Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands