headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
17
ATTACHING THE FENCE TO THE TABLE
(fig 7)
1. Place the fence assembly on the tabletop surface,
and align the two holes on the bottom of the fence
assembly with the two slots on the router table.
2. From underneath, slide a long round-head square-neck
bolt (10) through the left hole and a round-head square-
neck bolt (8) through the right hole. Slide a plain washer
(7) onto each bolt.
3. Put the clamping knobs (14) on the bolts. Secure
the fence to the tabletop surface by tightening the
clamping knobs.
4. To prepare the table for transportation and storage,
loosen the clamping knobs, push the fence back and
remove the fence from the table.
INSTALLING TABLETOP INSERTS
(fig 8)
This router table includes three tabletop inserts, each with
openings of different diameters: insert with 1-1/4” Diameter
Hole (21), insert with 1-7/8” Diameter Hole (22), insert with
2-1/8” Diameter Hole (23).
1. Position the tabletop insert over the insert opening in
the router table.
2. Press the insert into the insert opening in the router
table.
3. Press down evenly over the tabs until the insert locks
in place.
4. To remove, pull up gently until the tabs disengage.
When not in use, store tabletop inserts in a convenient place.
OPERA
TING INSTRUCTIONS
WARNING!
• Always unplug the router before attaching or removing the fence. The fence is shipped completely assembled.
• Always attach the fence to the table when you use the router table.
• Always unplug the router before attaching or removing the fence. The fence is shipped completely assembled.
• DO NOT attempt to remove tabletop inserts from the insert opening unless the router is unplugged.
• DO NOT use bits that have a cutting diameter that exceeds the clearance hole in the table inserts. Select a table
insert that has a clearance hole 2mm larger than the diameter of the bit being used.
FPO
fig 7
fig 8
Summary of Contents for 054-6841-4
Page 32: ......
