Masterclock
www.masterclock
.com
7
Mounting
Wall Mount Key Hole’s
Wall mounting key holes are position on back case for easy installation.
Mounting
The CLDTCD12 digital time display is designed wall mount. Power and low voltage signal wiring
should be installed according to local electrical codes, so to access the back of the clock.
Do not route power or signal cables between the case and the wall (along the exterior of the
wall), which may pinch the power or signal cable and create a hazardous condition.
Wall Mount Bracket
A wall mounting bracket is supplied which has been designed to fit on either a standard 2”x 4” or
4” x 4” conduit box. Mount the bracket on the wall/conduit box, attach the power cord and RG58
coax cable and secure the clock to the bracket using the supplied retaining screws.
Back of Clock
