Masterclock
www.masterclock
.com
14
GLOBAL PASSWORD
The
Global Password
feature allows the user to enter a single
password for all devices using the same password. During this
session and subsequent sessions of
WinDiscovery
, you will not
have to enter the password.
1.
Check [
Enable Global Password]
.
2.
Type your password.
3.
Click [
OK
]
To disable the Global Password, de-select the [
Enable Global
Password]
checkbox and click [
OK
].
[DEVICE SETTINGS] BUTTON
The “Device Settings” window includes three
sections. In “Configurable options” the [
Input
Control
] button takes you to a [
Time Code Reader
button
]. Clicking it permits the user to enable or
disable the Time Code client. If enabled, you can
choose SMPTE and IRIG Code Settings or VITC
Encoding.
The [
Time Code Reader
] button and window are
detailed on page 13.
The [
Display Properties
] button and window (at
left) permits the user to change the brightness of
the LEDs, to change the Time/Date presentation
order, to choose 12 or 24-hour time formats with
leading zeroes on or off and to choose UTC or local
time (once local time offsets have been input).
The “
Local Time Settings
” section includes two
buttons for [
Daylight Savings Time
] and [
Time
Zone/Time Offset
] to offset your displayed time
from UTC to Local time.
The [
Save
] and [
Save and Close
] buttons must be
clicked before hitting the [
Exit
] button. Otherwise
any entered changes will not take effect.
The
Global Password
being used must
match the password on all the devices
being administered. On any new system
being installed, the factory default
password on all devices is “
public
”.
