background image

 

Masterclock 

www.masterclock

.com

 

32 

Compliance  

 

 

 
Electromagnetic Compatibility 2004/108/EC 
Tested and Conforms to  EMC standards  
Low voltage directive 2006/95/EC 
Tested and Conforms to Safety standards 

 
FCC Statement 
 

 

This device complies with Part 15 of the FCC Rules and found to comply with 
the limits for a Class B digital device. These limits are designed to provide 
reasonable protection against harmful interference in a commercial/residential 
installation.  
 
Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation 

WEEE 
 

 

Waste Electrical and Electronic Equipment Directive (WEEE) 2002/95/EC 

 
The CLDTCD12 is considered WEEE Category 9 (Monitoring and Control 
Instruments Equipment) as defined by the WEEE Directive and therefore fall 
within the scope of the WEEE Directive. 
 
 

 

RoHS 

 

 

    

Compliant 

          by 
    Exemption

 

Restriction of the Use of Certain Hazardous Substances Directive 2002/95/EC 

 
The RoHS directive covers the same scope of electrical and electronic 
equipment that are under the WEEE directive, except that Category 8, Medical 
Devices, and Category 9, Monitoring and Control Instruments, which are under 
WEEE, are excluded from the RoHS directive. 
 
The CLDTCD12 falls under the category of Monitoring and Control Instruments 
Equipment (Category 9 as defined in Annex 1A of WEEE 2002/96/EC Directive) 
which is excluded from the RoHS directive 2002/95/EC (reference Article 2, 
paragraph 1) requirements. 
  
These products are manufactured using lead in the soldering process as 
allowed for items excluded from the RoHS directive. These units are RoHS 
Compliant only in that they are excluded from the RoHS directive under 
Category 9, Monitoring and Control Instruments. 

 

 

 

Summary of Contents for CLDTCD12



































Reviews: