Masterclock
www.masterclock
.com
22
Default Configuration
The CLDTCD12 digital clock maintains its configuration data in non-volatile flash memory allowing
the unit to retain configuration settings even when power is off. The clock may be configured by
using the WinDiscovery configuration utility and a USB cable.
The CLDTCD12 ships from the factory with the following configuration as defined below.
SETTING
CONFIGURATION SELECTION
Disabled
Time Zone Offset
Disabled
Daylight Savings Time
Enabled
Date information in time code
Enabled
24 Hour format
The
CLDTCD12
ships from the factory with “Time Zone / Time Offset” options set to
off in order to display UTC time.
The
CLDTCD12
interprets the incoming time code as UTC.
NAMING
All CLDTCD12 devices can be provided with a verbose
name. The name is arbitrary and may be useful for
organizing and managing devices once installed. By
default, device names are the product name
abbreviation followed by the device’s MAC address.
Customers should designate their own custom names
relating to their own organizational requirements, 32
characters max.
DEFAULT PASSWORD
The factory-default password for the network device
is:
public
.
Please use lower case.
RESET FACTORY DEFAULT CONFIGURATION
In some situations (such as a lost password) it may be
necessary to return your device to its factory default
configuration. A [
RESET
] button is located on the
clock’s rear cover.
To reset the configuration to factory default:
Press and hold the reset button for 10 seconds
(until
dashes appear on the digits) and then release. The
configuration will now be reset, including the
password. The unit will need to be reconfigured to
your custom settings.
Default
Recommendation
(Examples)
SL26-21:4B
Bldg101-Rm121
SL29-45:8A
Conference_Room-342
