Radical-7R Pulse CO-Oximeter Operator’s Manual
2-1
2
S y s t e m D e s c r i p t i o n
I n t r o d u c t i o n
The Radical-7R provides the functionality of three instruments in one:
■
The Radical-7R is a fully featured Handheld Pulse CO-Oximeter.
■
The Radical-7R is a fully featured Standalone Pulse CO-Oximeter.
■
The Radical-7R interfaces to the SpO2 input module of multiparameter patient
monitors to upgrade conventional pulse oximetry technology to Masimo SET
technology.
a
a
The Handheld portion of the Radical-7R contains the
majority of the Pulse CO-Oximeter features. All pulse co-
oximetry measurement information, as well as instrument
status data is displayed on the Handheld LCD screen.
All user input is performed through the control buttons
on the front panel. The sensor cable connector is located
on the Radical-7R Handheld Pulse CO-Oximeter.
The Handheld Pulse CO-Oximeter snaps
into the Radical
Docking Station to provide a fully featured standalone
Pulse CO-Oximeter. The Docking Station connects
to AC power for standalone operation or charging of
the Handheld. An optional Docking Station battery is
available. The standalone Radical-7R features nurse
call, analog output and interfaces to serial printers.
97
76
SpHb g/dl
17
7
10.0
SpOC
Utilizing a SatShare® cable, the standalone Radical-
7R also interfaces with the SpO2 input of a validated
multiparameter patient monitor, instantly upgrading the
conventional pulse CO-oximetry to Masimo SET pulse
oximetry. The SatShare cable attaches to the back of the
Radical Docking Station, and SatShare cables are available
to interface with most multiparameter patient monitors
.
CAUTION:
■
THE WAVEFORM DISPLAYED ON THE MULTIPARAMETER PATIENT
MONITOR IS A SIMULATED SIGNAL (NON-NORMALIZED). REFER TO THE
RADICAL-7R PULSE CO-OXIMETER DISPLAY FOR PATIENT WAVEFORM.
■
IF DISPLAYING THE SIMULATED WAVEFORM IS NOT DESIRABLE, IT IS
RECOMMENDED TO TURN OFF THE PLETHYSMOGRAPHIC WAVEFORM
DISPLAY ON THE MULTIPARAMETER MONITOR.
■
ONLY USE A SATSHARE CABLE THAT HAS A FERRITE BEAD INSTALLED.
■
ONLY SpO
2
AND PULSE RATE CAN BE DISPLAYED ON THE
MULTIPARAMETER MONITOR WITH SATSHARE.
