Model: TC5396
masibus
Doc. Ref. no. : - m105/om/101
Issue no. 00
User’s Manual
Page 12 of 40
Process
Value
Display
PV
3.
4 digital 0.8 inch White Display
4.
Display process value.
5.
Display parameter name when user set parameter.
6.
Display error message when an error occurs.
Set Value
Display
SV
4 digital 0.4 inch GREEN
Display set value.
Display parameter value of parameter in process value
field when user set parameter.
Display control output value when in manual mode.
Manipulated
Value
MV
Display control output value in form of Bar scaled in 10
segments bar orange led
Relay-1
Indication
RL1
ON when Relay-1 is energized & OFF otherwise.
Relay-2
Indication
RL2
ON when Relay-2 is energized & OFF otherwise.
Relay-3
Indication
RL3
ON when Relay-3 is energized & OFF otherwise.
Relay-4
Indication
RL4
ON when Relay-4 is energized & OFF otherwise.
MANUAL
Indication
MAN
ON when unit is in Manual mode.
OFF when unit in Auto Mode.
Auto tune
Indication
AT
Blink when Auto tune Process is on
Control Set
point - 1
Indication
SP1
ON when Set Point 1 is selected. All controller action with
respect to SP-1
TX
Indication
Tx
ON when device is transmitting some Data (RS-485).
RX
Indication
Rx
ON when device is receiving some Data (RS-485).
Example:
How to change SET POINT:-
C1SP and A2SP will be shown in operator mode if they are selected in one of the SELECT
Display Parameter from
Here
“
SELECT display 1
”
(DS1) is set for
“1”(C1SP)
and
“
SELECT display 2
”
(DS2)is set for
2 (A2SP).
