Maserati GranTurismo Sport 2015, Owner'S Manual

Page: 85 / 242

Q R S
T
3
85
HomeLink
This system allows you to control
automatic gate and garage door
opening devices, as well as lighting or
alarm systems from inside the vehicle.
Programmable directly on the
transmitting station by means of
the original remote controls for the
devices to be controlled, it adapts to
the existing systems.
The control and programming panel
is composed of three keys:
Q, R, S and
a LED T .
Customer Assistance
If you have problems with training
the HomeLink Universal Transceiver,
or would like information on home
products that can be operated by the
transmitter, call (800) 355-3515. On the
Internet, go to www.Homelink.com.
Important Safety Precautions
Always refer to the operating
instructions and safety information
that came with your garage door
opener or other equipment you
intend to operate with the HomeLink
Universal Transceiver. If you do not
have this information, you should
contact the manufacturer of the
equipment.
While training or using HomeLink,
make sure you have a clear view of
the garage door or gate, and that no
one will be injured by its movement.
General Information
If you are programming HomeLink
to operate a garage door or gate, it
is recommended that you unplug the
motor for that device during training.
Repeatedly pressing the remote
control button could burn out the
motor.
HomeLink stores the code in a
permanent memory. There should
be no need to retrain HomeLink if
your car’s battery goes dead or is
disconnected.
If your garage door opener was
manufactured before April 1982,
you may not be able to program
HomeLink to operate it. Garage door
openers manufactured before that
date do not have a safety feature that
causes them to stop and reverse if an
obstacle is detected during closing,
increasing the risk of injury. If you
have questions, call (800) 355-3515.