Maserati GranTurismo Sport 2015, Owner'S Manual

Page: 24 / 242

A
C
B
2
24
Seat belts
The vehicle is equipped with seat belts
with automatic retractor designed for
maximum freedom of movement.
The seat belts are equipped with
electronically-controlled load limiting
devices and pretensioners. In addition,
the attachment points of all the
seat belts are directly attached to
the seat, in order to help ensure
optimal protection, whatever the seat
position.
Maserati urges you to use
the seat belts correctly
fastened and adjusted at all
times!
Correct use of the seat belts
can help reduce the risk of
serious injury in the event of
an accident.
The passenger and rear side seats are
equipped with KISI System, which
is designed to help improve safety
when children are traveling in special
child seats. The system is activated
by pulling out the belt to its full
length: once the child seat is securely
fastened, the belt can no longer be
pulled out and hence the belt/child
seat system is more secure.
When the belt is released and fully
retracted, the system deactivates and
resumes its normal operation.
Do not pass seat belts over
sharp edges. They could tear.
Do not pin anything to the
seat belts. This could reduce
their initial strength and
cause them to tear in the event of a
crash.
Always deactivate this
feature prior to using the
seat belt for normal use.
Having the retractor locked can be
dangerous when the seat belt is used
for directly restraining a passenger.
Fastening the seat belts
Extract the lower section of the seat
belt from the outer side of the seat
and secure it by holding the fastening
tang
A , and pulling out the belt until
the tang inserts into the buckle lock B .
The belt is correctly engaged when
the lock clicks into position. To release
the belts, press button
C .
If the driver’s seat belt is not fastened
or improperly fastened, the warning
light
on the instrument panel
illuminates.
If the passenger’s seat belt is not
fastened or improperly fastened,
on the display appear the message
“Fasten passenger seat belt”.
A buzzer is also actived when
the warning light or message are
activated.
The retractor locking device is
designed to activate whenever the
belt is pulled out too rapidly or in case
of sudden braking or collision.
If the belt locks due to too rapid
extraction, allow it to retract a short
distance to disengage the locking
device. The retractor is designed to
allow the belt to automatically fit
to the passenger’s body, allowing
free movement. When the vehicle is
parked on a steep slope, the retractor
may lock: this is normal.
WARNING: Feed the belt back into the
retractor by hand to avoid twisting
and snagging.