Maserati GranTurismo Sport 2015, Owner'S Manual

Page: 25 / 242

D
2
25
Adjusting the front seat belts
height (front seats only)
The seat belts height must
be adjusted only with the
vehicle stationary.
Always adjust the height of the
front seat belts so that they suit the
driver’s and passenger’s height. This
precaution can help to substantially
reduce the risk of injury in a collision.
The correct adjustment is achieved
when the belt passes about mid-way
between the end of the shoulder and
the neck.
The upper attachment point of
the seat belts is equipped with an
oscillating ring capable of moving
into 4 different positions, allowing
the belts position to be adjusted.
Do not bring sharp edges
in contact with a seat belt.
This could reduce their initial
strength and cause them to tear in
the event of a crash.
If a seat belt has been brought in
contact with a sharp edge, or has
been used to pin something to it,
have it immediately replaced by our
Authorized Maserati Dealer.
To move the attachment fitting, press
control
D .
After the adjustment, always
check that the slider to
which the oscillating ring
is fixed, is locked into one of the
positions provided. With the handgrip
released, push again downward to
allow the anchoring device to click
into place, in the event that it has not
been released in one of the positions
provided.
Using the rear seat belts
The belts for the rear seats must be
worn as shown in the figure.
Remember that, in the event
of a violent impact, the
passengers on the rear seats
that are not wearing the seat belts
are not only subject to personal injury
but they also represent a danger for
passengers sitting in the front seats.
The seat belts must be worn keeping
your chest in the upright position and
lying against the backrest.