Maserati GranTurismo Sport 2015, Owner'S Manual

Page: 74 / 242

J K L
3
74
Controls
MODE
The screen page activation and
setting are controlled by pressing the
MODE
J buttons, “+” K and “-” L .
Pressing the MODE J button briefly
will switch to the following screen
pages in sequence:
- Trip
A
- Trip B
- Tire pressure
- Left-hand front seat comfort
- Right-hand front seat comfort
- Option
Selection
- TPMS calibration
- Standard.
Each of these has a 10-second
timing, after which the non-flashing
information previously viewed is
restored.
Pressing the MODE J button at length
(over 2 seconds) the user will select
the Trip Odometer information
currently displayed, or the Trip
Odometer A if the tachometric
repetition is active. This piece of
information will flash for 10 seconds,
after which the non-flashing
information previously viewed is
displayed once again.
“+“ and “-”
By means of the “+ “ K and “-” L
buttons, the user can adjust the
instrument panel brightness.
When the “Option Selection” screen
page is viewed, these buttons can be
used to select, choosing between Trip
Odometer A and Trip Odometer B, the
information to be repeated on the
display. By selecting, Odo A or Odo
B using the MODE
J button and then
pressing buttons “+ “ and “-”, the
user will display the trip information
selected (flashing) alternately.
When the “TPMS calibration” page
is displayed, press button “+” to
activate the calibration process.
Trip Odometer reset
In all these cases, and before the 10-
second timing has elapsed, pressing
the MODE
J button briefly (less
than 2 seconds) will reset the trip
information relating to the flashing
Odometer (A or B).
Setting the date
The date can be set by means of
the set up menu of the Multi Media
System (see Multi Media System
Manual).