2-72
68PH5-74E
Time indication of clock “
”
•
: 12-hour format (Default set-
ting)
•
: 24-hour format
Central door locking system “
”
•
: Unlock all doors by turning the
key or pushing the keyless
entry system transmitter once
•
: Unlock all doors by turning the
key or pushing the keyless
entry system transmitter twice
(Default setting)
Automatic door locking function “
”
•
: Disable the automatic door
locking function
•
: Lock all doors when the vehi-
cle speed reaches 15 km/h
(Default setting)
•
: (For CVT vehicle)
Lock all door when the gear-
shift lever is in other than “P”
Automatic door unlocking
function “
”
•
: Disable the automatic door
unlocking function
•
: Unlock all doors when the key
is pulled out from the ignition
switch (Default setting)
•
: (For CVT vehicle)
Unlock all doors when the
gearshift lever is moved to the
“P” from other position
Door locking and unlocking
siren “
”
•
:
Siren sounds when the
door(s) is(are) locked or
unlocked by using the key-
less entry system transmitter
(Default setting)
•
: Siren does not sound when
the door(s) is(are) locked or
unlocked by using the key-
less entry system transmitter
Additional flashes
of the turn signal “
”
•
:
Turn signal flashes three
times after the turn signal
lever is returned
(Default setting)
•
: Disable the additional flashes
of turn signal
Shock sensor “
”
•
: Enable the shock sensor
•
: Disable the shock sensor
(Default setting)
Pre-warning sensitivity of
the shock sensor “
”
•
: Disable the pre-warning
•
to
:
Adjust the pre-warning sensi-
tivity of shock sensor (Lowest
sensitivity level is L01 and
highest is L15, and default
setting is L14)
Full blast warning sensitivity
of the shock sensor “
”
•
: Disable the full blast warning
•
to
:
Adjust the full blast warning
sensitivity of shock sensor
(Lowest sensitivity level is L01
and highest is L15, and
default setting is L09)
Initialization setting “
”
•
: Initialize
all
settings
68PM00272
NOTE:
• As shown in the above illustration, “SEL”
indicates on the display of currently set-
ting item.
• To go back to the higher level display
during operation, turn the indicator
selector knob (3) to display “
” or
“
” and then push the indicator
selector knob (3).
5) to exit the setting mode, switch the dis-
play to show “
” and then push the
indicator selector knob (3).
EXAMPLE