MARUTI SUZUKI Baleno RS, Owner'S Manual

Page: 127 / 323

2-104
BEFORE DRIVING
68PH5-74E
Guide Me Light (Vehicle with auto-
matic lights operation)
Follow me home function
This function turns on the front position
lights and the headlights in the low beam
setting for about 10, 15, 20, 25 or 30 sec-
onds after the engine switch is pressed to
change the ignition mode to “LOCK”
(OFF).
To set the function:
1) Turn the lighting switch to the “AUTO”
position
2) Press the engine switch to change the
ignition mode to “LOCK” (OFF).
3) Pull the lighting control lever toward
you once and open the driver’s side
door within 60 seconds. Or pull the
lighting control lever toward you once
while the driver’s side door is open.
To cancel the function:
Perform any of the following operations.
• Pull the lighting control lever toward you
once.
• Change the ignition mode to “ACC” or
“ON” by pressing the engine switch.
• Turn the lighting switch to any other
position than the “AUTO” position.
NOTE:
• When the “follow me home” is function-
ing, the front fog lights and the head-
lights (High beam) are not turned on.
• Lighting time of the “follow me home
function” can be changed on the infor-
mation display. Refer to “Information Dis-
play” in this section.
Lead to vehicle function
If the “UNLOCK” button of the remote con-
troller is pressed while the lighting switch is
positioned in the “AUTO”, the front position
lights and the headlights in the low beam
are turned on for 10, 15, 20 or 25 seconds.
The lead to vehicle function will operate
only when it is dark outside the vehicle.
To cancel the function:
Perform any of the following operations.
• Lock the doors by using the remote con-
troller or request switch, or the key in the
driver’s door lock.
• Change the ignition mode to “ACC” or
“ON” by pressing the engine switch.
• Turn the lighting switch to any other
position than the “AUTO” position.
NOTE:
• When the “lead to vehicle” is functioning,
the front fog lights and the headlights
(high beam) are not turned on.
• Lighting time of the “lead to vehicle func-
tion” can be changed on the information
display. Refer to “Information Display” in
this section.
Front Fog Light Switch
(If equipped)
68PH00256
To turn the front fog light on, twist the knob
as shown in the illustration with the posi-
tion lights, tail lights and/or the headlights
are on. When the front fog light is on, an
indicator light on the instrument cluster will
come on.
EXAMPLE