MARUTI SUZUKI Baleno RS Owner'S Manual Download Page 219

Page: 219 / 323

5-40

OTHER CONTROLS AND EQUIPMENT

68PH5-74E

Selecting a folder

1) Touch the “FLD” (folder operation) but-

ton (4).

2) Touch the “TUNE/TRACK” Up/Down

button (1).

•

: Touch the Up button to move to the

next folder.

•

: Touch the Down button to move to

the previous folder.

Repeat playback

1) Touch the “SETUP” (random/repeat)

button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Repeat”, and

touch the “DISP/ENT” button (2).

• Each time the “DISP/ENT” button (2) is

touched, the mode will change as follows:

Off

→

One song repeat

→

Folder repeat ...

Random playback

1) Touch the “SETUP” (random/repeat)

button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Random”, and

touch the “DISP/ENT” button (2).

Each time the “DISP/ENT” button (2) is

touched, the mode will change as fol-

lows:

Off

→

Folder random

→

All random ...

Display change

1) Touch the “DISP/ENT” button (2).

• Each time the button is touched, display

will change as follows:

MP3/AAC:

Artist name/Track title

→

Album name/

Track title

→

Folder name/File name...

WMA:

Artist name/Track title

→

Folder name/

File name ...

NOTE:

• “NO TITLE” will be displayed when there

is no text information in the USB device

currently being played.

• “...” is displayed if all text data cannot be

displayed. Touch and hold the “DISP/

ENT” button (2) for at least 1 second to

automatically display the rest of the text

data.

Notes on USB device
Compatible USB devices

• USB Mass Storage Class

For details as to whether your USB

memory/USB Audio is compatible with

USB Mass Storage Class, please con-

tact the USB memory/USB Audio manu-

facturer.

• Audio file

MP3 (.mp3)/WMA (.wma)/AAC (.m4a)/

AAC (.aac)

• File System

FAT 12/16/32,VFAT (supporting long file

name)

• USB Standard Compatibility

1.1/2.0 Full Speed

• If a USB hub or extension cable is con-

nected to the audio system, it may not

be recognized. In this case, directly con-

nect the USB device to the audio sys-

tem.

• Devices such as MP3 players/mobile

phones/digital cameras may not be rec-

ognized as audio systems for playing

music.

Summary of Contents for Baleno RS




































































































































































































































































































































Search results

Summary of Contents for Baleno RS

Reviews:

Related manuals for Baleno RS

Brands by name

Popular brands

MARUTI SUZUKI Baleno RS, Owner'S Manual

Search results

Summary of Contents for Baleno RS

Reviews:

Related manuals for Baleno RS

Brands by name

Popular brands